[nai]

Having to sell my setup.

2x 8x4ft boards, drilled and t-nuttted
Extra panels to make height up to ~10ft (one slightly narrower than 4ft to fit my setup)
Kick board.
support/structure beams
2ft x 8ft campus board (two 2x4ft panels).

~120 bolt-on holds
A few screw-on holds

Edge and blob style footholds.

5 Medium wood grips campus rungs

3 mixed size climbing academy campus rungs

Set of 10 crusher crimps

Bolts of various lengths.

Few extra t-nuts and selection of  screws.

Selection of homemade softwood holds

Will have to take it down soon but for now it can be viewed in-situ in S17.

https://photos.app.goo.gl/YGxhteV38112zvjb8

[Durbs]

What price are you looking at?

[nai]

That'd help wouldn't it.

Would like £200.
There are about 130 bolt ons, 35 screw ons, the set of 10 crusher crimps, eight campus rungs plus about 40 foot jibs, so it's effectively around £1 per hold and get the wood and metal wear free.

[Durbs]

Wickedy whack - just looking at delivery options (friend is a man and van company).

It would be going outside, so I'll need to tweak it etc. Is the wood all pretty solid, a few years of life left in it? Some of the photos make it look split.

[nai]

Hand't noticed that but I can see where you mean.

Looks superficial, I've braved the cobwebs to check from behind and theres no spilt visible. I'm confident it's ok but will have to get it down to be 100%.

The two main boards are 18mm marine ply, most sources suggest 25 years lifespan and they're maybe 10 years old now.  Pretty sure the other panels are the same grade too.

[Durbs]

Cool, thanks for checking.

I'll run it past the Mrs and let you know ASAP.

[nai]

Update on this now I'm in the process of dismantling it.

The two extension pieces didn't come off clean and are headed for the tip.

The campus board needs a few inches lopping of the bottom but above that is fine.

The main boards are still up but look fine, no splitting or delayering to worry about, feel perfectly solid. T nuts all good rust free. Supporting wood and kick board also good.

Holds:

Bolt ons, 113 pictured, all in good nick, mix of bleaustone, holdz, entreprise, rockworks and others. There's a few more that are slightly broken but useable in with the freebies. Good mix of hold types.

https://photos.app.goo.gl/77Ht4V1UYHLyJSBL9

Screw ons.

https://photos.app.goo.gl/aCBqFsdfsMagCQGRA

Rungs and crimps as previously listed.

https://photos.app.goo.gl/3rGqN6k6wyGP2hbr9

Freebies: slap seconds, homemade wooden holds and blob footholds. The slap holds needed the bolt hole drilling out a bit, they look a bit untidy but function perfectly well as holds. Around 30 wooden holds from 10mm crimps to XL campus rungs.

https://photos.app.goo.gl/f4hMbXqyampNSCNo8

Hardware, 100+ bolts mostly 35, 50 and 60mm but a few longer ones. Loads of screws and quite a few more to come.

https://photos.app.goo.gl/WTeqpK7Y8HFr8ksc6

Thinking £150 would be more fair, again charging for the good holds and rungs and bundling in the seconds, homemade holds, boards and hardware.

[Alaister]

Would you take £120?

I could pick it up sometime this week.

[nai]

Hi Alaister, I'll try to DM you