Andy if I got a photo/sketch of 3 tiers with holds marked up could you describe some of the old skool problems a la what you've done for minus ten.
What is the sequence for getting from the low starts into the press starting position? do you use the slopy crimp thing below the LH press hold, or is it straight from the rail into the gaston?
Any idea about the straight up left of Miller's Tale, on drilled monos? It's the start to a route, but I don't know which one.
There is a really cool 8a+ route traverse (7c font) here that's a real power endurance pump from extreme right to left of the 3 tiers. You'll have to ask someone older than 30 to find out th sequence.
ps: bubba, getting some wierd font stuff through since the tweaking the other day - see above quote - is this steve jobs or bill gates fault? (can't be mine surely)
QuoteThere is a really cool 8a+ route traverse (7c font) here that's a real power endurance pump from extreme right to left of the 3 tiers. You'll have to ask someone older than 30 to find out th sequence.remember this full traverse well - start at the big port hole on the right and swing along the edges (keep off the big break above), with a classic 80's crossover crux on the minging dish thing, then into the low level traverse and up debris - best done in tights, a 'banana' pod chalkbag and two bits of carpet (one for each end)
The extra traverse from the porthole looks like it doesn't see much traffic these days, lots of vegetation.