Hold tight, it's the holds thread

[Monolith]

Can anyone advise me where I can buy decent cheap board holds (small screw ons, old school room style resin holds etc.). Too many holds these days look too good and pricy.

 

[dunnyg]

Crusher holds are pretty good value for money, one of the crimpy board sets works out at just over 2 quid a hold, might be what youre after (dont have any yet, but have ordered some).

 

[Monolith]

Thanks, I have a few Crusher holds and know them well. It’s more the resin holds I’m hunting...

 

[dunnyg]

I have struggled to find any, would be interested if you find some.

 

[Bradders]

Likewise interested if you find any. All the resin holds now are in lovely ergonomic shapes and textures, where really I just want some ratty little horrible things.

 

[gollum]

Many years ago, when I had a board, I used a set of Metolius foot holds as hand holds. Board was 45°, although quite small so feet on kickboard a lot. Over the years every hold was used on a problem at some point, some took longer than others.

Just looked at the current ones and they look the same.

 

[csl]

Can anyone advise me where I can buy decent cheap board holds (small screw ons, old school room style resin holds etc.). Too many holds these days look too good and pricy.

I bought a few packs of these https://www.holdz.co.uk/collections/screw-ons/products/chips-4 from Holdz to use as handholds - some of them are a bit slopey so have ended up as feet but most of them are usable as crimps on my 40º board. I also got these https://www.holdz.co.uk/collections/screw-ons/products/crimp-edges

 

[csl]

These are good for ratty crimps too https://www.holdz.co.uk/collections/crimpz/products/screw-on-crimpz

 

[SA Chris]

Likewise interested if you find any. All the resin holds now are in lovely ergonomic shapes and textures, where really I just want some ratty little horrible things.

Shame I'm so far away, I inherited holds from both Dave P, and another friend who took their wall down, some right ratty old school things among them.

Most rat like crimps i have are these https://www.outside.co.uk/bleaustone-training-range-symmetrics-set.html

the smallest of which i can can barely hold on my board - 26 deg, so for a wad should be ideal. The others are more incut

 

[Paul B]

I think your best bet for old skool resin is to trawl Facebook marketplace and climbing buy/sell groups. I've managed to buy a reasonable amount (enough Boulder UK would be jealous I'm sure) of classic EP (from before they went shit).

Pusher are back re-moulding their back-catalogue but seem to have lost their way a bit and are churning out dual texture stuff in preference. They aren't cheap.

If anyone is reading this and has a set, I'd like to get my hands on the Malc Smith Trainingstone holds by Stonesmith.

 

[Duma]

If anyone is reading this and has a set, I'd like to get my hands on the Malc Smith Trainingstone holds by Stonesmith.

I recently acquired 4 (holds not sets!) from a mates board that was being dismantled, they are excellent. Sorry, no leads on any more though!

 

[remus]

If anyone is reading this and has a set, I'd like to get my hands on the Malc Smith Trainingstone holds by Stonesmith.

I recently acquired 4 (holds not sets!) from a mates board that was being dismantled, they are excellent. Sorry, no leads on any more though!

Are they pink and off Si's ex-board?! They're mine if so! Glad to hear they're back in use

 

[Oldmanmatt]

Can anyone advise me where I can buy decent cheap board holds (small screw ons, old school room style resin holds etc.). Too many holds these days look too good and pricy.

I bought a load of very cheap holds on Ebay. Mixed colours, no sets, resin and new. I think the were sold as small foot holds for school playground traversing walls.

https://www.ebay.co.uk/itm/Climbing-Holds-Rough-Production-Seconds-Set-of-16-Screwon-Footholds/154178177306?hash=item23e5bc491a:g:OCoAAOSwAmtfjt3k

https://www.ebay.co.uk/itm/Selection-of-resin-climbing-holds/184699200843?hash=item2b00ee254b:gscAAOSwwUhgOoBn

 

[SA Chris]

If anyone is reading this and has a set, I'd like to get my hands on the Malc Smith Trainingstone holds by Stonesmith.

I recently acquired 4 (holds not sets!) from a mates board that was being dismantled, they are excellent. Sorry, no leads on any more though!

Are these hold going to become like copies of Extreme Rock and increase in value every time they change hands?

 

[tomtom]

Can anyone advise me where I can buy decent cheap board holds (small screw ons, old school room style resin holds etc.). Too many holds these days look too good and pricy.

I bought a load of very cheap holds on Ebay. Mixed colours, no sets, resin and new. I think the were sold as small foot holds for school playground traversing walls.

https://www.ebay.co.uk/itm/Climbing-Holds-Rough-Production-Seconds-Set-of-16-Screwon-Footholds/154178177306?hash=item23e5bc491a:g:OCoAAOSwAmtfjt3k

https://www.ebay.co.uk/itm/Selection-of-resin-climbing-holds/184699200843?hash=item2b00ee254b:gscAAOSwwUhgOoBn

I got some like OMm’s top link here (the screw ons) from eBay. I mean mostly they work as footholds. But are shit really. Uneven - don’t sit very flush to the wall and one split in two when screwing on.

They were cheap. I guess they work - but I wouldn’t want them for hands..

 

[cheque]

Are these hold going to become like copies of Extreme Rock and increase in value every time they change hands?

Somewhere someone has a still-boxed set of Stonesmith holds under their bed that will one day be worth a fortune.

“It’s remarkable to find any pre-pandemic climbing holds in such good condition, let alone such a complete set. These are believed to have only been produced in this colour for a customer in the south east but Smith was in such a strop about that fucking film that everyone went on about but was never finished that they were never delivered. In all my years as a pre-Olympic climbing equipment dealer I haven’t been so excited since I saw my first pair of original Solutions with the intact tab. It’s up there with finding a set of pre-went-shit Entreprises, it really is.”

 

[Duma]

Genius!

 

[Duma]

If anyone is reading this and has a set, I'd like to get my hands on the Malc Smith Trainingstone holds by Stonesmith.

I recently acquired 4 (holds not sets!) from a mates board that was being dismantled, they are excellent. Sorry, no leads on any more though!

Are they pink and off Si's ex-board?! They're mine if so! Glad to hear they're back in use

They are indeed! Although they came via Ant's board.

 

[Paul B]

They're essentially resin replicas of a few holds from the school as far as I can tell. The texture and resin seems pretty good to me too.

I'm pretty gutted you've got 4 sets and I can't find one!

 

[Duma]

4 holds not sets...